Mmc: 101 - Change User Passcode - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 101
DESCRIPTION:
Allows the system administrator or technician to reset any keyset's passcode to its
default value of "1234." This MMC cannot display station passcodes; it can only
reset them to default.
Keyset users can set or change their individual passcodes. The passcode is used to
lock or unlock the keyset for toll restriction (call barring) override and to access the
DISA feature.
NOTE: Default passcodes cannot be used for toll restriction override or for DISA access.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear previous entry
ACTION
1. Press TRANSFER 101
Display shows
2. Dial keyset number (e.g., 205)
OR
Use UP or DOWN to scroll through
keyset numbers and press RIGHT
soft key to move the cursor right.
3. Press HOLD to reset passcode.
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: ALL STATION PASSCODES = 1234
RELATED ITEMS: MMC 100 STATION LOCK
CHANGE USER PASSCODE
DISPLAY
[201]
PASSCODE:
[205] PASSCODE
PASSCODE:
[205] PASSCODE
PASSCODE : 1234
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006
PASSCODE