Mmc: 202 Change Feature Passcode - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 202
DESCRIPTION:
Used to change the passcodes for the following features: RING PLAN, DISA ALARM,
ALARM CLR, AA RECORD, DELETE, and WLI REGIST.
DIAL OPTION
0 RING PLAN
1 DISA ALARM
2 ALARM CLR
3 AA RECORD
4 DELETE
5 WLAN
NOTE: The passcode is four digits long. Each digit can be 0-9.
PROGRAM KEYS
KEYPAD Used to enter passcodes
SPEAKER Save data and advance to next MMC
ACTION
1. Press TRANSFER 202
Display shows
CHANGE FEATURE PASSCODE
DESCRIPTION
This is the passcode required to place the system in
different ring plans (RP) or change the ring time
override (RTO).
This is the passcode required to clear a DISA ALARM
generated when the number of DISA attempts are
exceeded.
This is the passcode required to clear an alarm
sensor.
NOT USED. This item will be removed in the future
from the OfficeServ 7400 software.
Hotel / Motel feature passcode, required to delete
entries from a guest or meeting room bill.
This is the passcode to allow mobile stations to
register to the WLI card.
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
CHANGE PASSCODE
RING PLAN :0000
Table of Contents