Mmc: 608 Assign Review Block - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 608
DESCRIPTION:
Provides means of adding or deleting CID / ANI review blocks to an individual
keyset. With the ability to delete a block or blocks or speed dial, it will not be
necessary to waste these on such items as voice mail, DPIMs or for keysets that do
not have displays. The free list will show how many bins are left to be assigned. A
system has 2500 total bins. Each keyset may be assigned a maximum of 50 bins.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPEAKER Used to store data and advance to next MMC
HOLD Used to clear entry
TRANSFER To exit programming
ACTION
1. Press TRANSFER 608.
Display shows first station.
2. Enter desired EXT number (e.g. 205)
OR
Press UP or DOWN key to make selection
and press RIGHT soft key to advance cursor.
3. Enter valid number for bins (e.g. 5)
OR
Press UP or DOWN key to make selection
OR
Press HOLD key to delete bin(s).
4. Press TRANSFER to store and exit
OR
Press SPEAKER to store and advance to next
MMC.
DEFAULT DATA: STATIONS: NONE
RELATED ITEMS: NONE
ASSIGN REVIEW BLOCK
DISPLAY
[201] REVW BLOCK
NONE: 1500 FREE
[205] REVW BLOCK
NONE: 1500 FREE
[205] REVW BLOCK
50 : 1450 FREE
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006