Mmc: 410 Assign Disa Trunk - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 410
DESCRIPTION:
Allows the system the ability to have Direct Inward System Access (DISA). Because
there is a possibility that unauthorized calls will be made via this feature, several
safeguards have been added. The end user must be informed of these to prevent
unnecessary service calls. DISA can lockout when a predetermined number of
invalid consecutive calls are attempted. Callers will then receive error tone until the
programmable timer has expired. The
while in a station to station call. The # key may be used to terminate the DISA call
and disconnect the central office line. DISA lines must be assigned to the Ring
Plan(s).
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRANSFER 410
Display shows
2. Dial trunk number (e.g., 704)
OR
Press UP or DOWN key to select trunk and
press RIGHT soft key
OR
Press ANS/RLS key to select all trunks
OR
3. Press VOLUME key UP or DOWN key to
select a Ring Plan (e.g. ring plan 3).
Using the dial pad press 1 to apply and 0 not
to apply to a particular Ring Plan and
press RIGHT soft key to return to step 2.
ASSIGN DISA TRUNK
key may be used to initiate new dial tone
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL (trunks)
Home Page
PROGRAMMING
PART 2 JUNE 2006
DISPLAY
[701] 123456
DISA LINE: 000000
[704] 123456
DISA LINE: 000000
[ALL] 123456
DISA LINE: 000000
[704] 123456
DISA LINE: 001000
Table of Contents