Mmc: 709 Toll Pass Code/Special Code Table - Samsung OfficeServ 7400 Technical Manual

OfficeServ 7400
TECHNICAL MANUAL
MMC: 709
DESCRIPTION:
This MMC provides a means to program three trunk code tables as described
below.
PBX ACCESS CODE: This table contains up to five entries and is used to identify
the trunk access codes needed for toll restriction to be properly applied when the
system is used either behind a PBX or with CENTREX-supplied dial tone. Toll
restriction will only be applied on trunks flagged as PBX in MMC 401 if a trunk
access code entered in this table is dialed. Toll restriction will be applied to the
digits following the trunk access code.
SPECIAL CODE: This table identifies to the system dialling rules the special feature
codes used to activate central office custom calling features such as CID Block and
call waiting disable. The special feature codes can be used on a per call basis
without affecting LCR or toll restriction programming. There is a maximum of ten
(10) entries available each of which may be up to four digits long. The four dialing
rules that apply to the Special Code Table are as follows:
Rule 1. Toll restriction is only applied to digits following the entries in the Special
Code Table. This eliminates toll restriction bypass with second dial tone
central office features such as CID block ( 67).
Rule 2. LCR will only route calls based on the digits following the entries in the
Special Code Table. This rule allows end user per call special code
activation.
Rule 3. LCR modify digits tables will only delete digits following the Special Code
Table entries. This allows central office features such as CID block to be
used when LCR deletes digits. Can be used in Foreign Exchange (FX)
routing by removing the 1+ area code..
Rule 4. LCR modify digits tables will only insert digits after the Special Code
Table entries (MMC 718). This allows for central office features such as
call waiting block to be activated but route the call with a specific PIC
code such as 10288 (AT&T).
Example of Rule 4: User dials 67 1 305 529 2900, the system will seize
a C.O. line and dial 67 10288 1 305 529 2900.
TOLL PASS CODE / SPECIAL CODE TABLE
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006