Samsung OfficeServ 7400 Technical Manual page 86

OfficeServ 7400
TECHNICAL MANUAL
38 ONE TCH FACC: ON
39 SGR ALL OUT :ON
40 CHAIN FWD :ON
41 TRK MONITER :ON
42 VoIP MFRALOC :OFF
43 NTWK AUTOTMR:OFF
46 PERI UCD SIO:OFF
48 REDIAL REVW:OFF
53 PRE FWD BUSY:OFF
54 ORG DIAL LOG:ON
55 TIE TRSF RCL:ON
56 VOIP REALRBT:OFF
57 CO-CO TM ALL:OFF
MMC: 210
When ON, then a station may enter an account code
using a one touch account code (ACC) key. When OFF,
then a station must enter an account code by dialing via
dial-pad before making an outside call.
This option, when on, allows all members to log out of a
station group.
When ON and a call is directed to a station that may be
forwarded to another station that is call forwarded to a
VMAA, then the caller will be directed to the last station's
mailbox it reached. When OFF, then the caller will be
directed to the first station's mailbox instead of the last.
When set to ON, a barging party maintains the trunk
connection, when the barged station goes on hook. When
set to OFF, and the barged station goes on hook, all
parties are disconnected.
When set to ON, a DTMF receiver is assigned for VoIP
tandem calling when a VoIP incoming trunk is connected
to a VoIP outgoing trunk. Note: Except when H.245 signal
mode is being used.
This option only affects systems with LE software and
controls whether an intercom call across the network link
will have the auto timer come on when the call is received.
When this option is set to ON the PERI UCD date is sent to
the UCD port type of SIO port service, instead of the PERI
UCD port type.
When set to ON, this option will allow the user to review
the last number dialed before dialing.
When set to ON this option makes the preset forward no
answer setting in MMC 316 act as forward on BUSY/NO
ANSWER.
When this option is set to ON all digits dialed from a
phone will be saved in the log.
When this option is set to ON a call transferred over a TIE
line will no answer recall back to the originating station.
If this option is set to ON the MGI channels will provide the
ringback tones.
NO DESCRIPTION AVAILABLE.
Table of Contents
Home Page
PROGRAMMING
PART 2 JUNE 2006