Program Procedures - Samsung OfficeServ 7400 Technical Manual

Table of Contents
Home Page
OfficeServ 7400 PROGRAMMING
TECHNICAL MANUAL PART 2 MAY 2006
PART 2. PROGRAM PROCEDURES
2.1 OVERVIEW
THE FOLLOWING INSTRUCTIONS FOR EACH MMC ASSUME THAT YOU HAVE
ALREADY OPENED PROGRAMMING.
HELPFUL HINT:
When you are finished programming in MMC codes 100–855 and have other
programming to do, press SPEAKER to exit the MMC but stay in the programming
mode and use one of the following methods.
1. Dial another MMC code directly and continue programming.
2. Press VOLUME UP and DOWN keys to scroll through all MMC codes. When the
desired MMC code is reached, press SPEAKER and continue programming.
Pressing TRANSFER will always save changes and exit the programming mode.
2.1.1