33
MAPS actions
Editing a MAPS policy
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
2. Select any non-default policy in the list and select Edit.
3. To edit an existing rule, select the rule in the Rules area and click the left arrow button.
4. To edit groups, refer to
5. Click OK on the Edit Policy dialog box to update the policy and return to the MAPS Configuration
6. Click Close on the MAPS Configuration dialog box.
Cloning a MAPS policy
1. Right-click a device in the Product List or Connectivity Map and select Fabric Vision > MAPS >
2. Select a policy in the list and click Add.
3. Enter a name for the policy in the Name field.
4. To create a new policy, refer to
5. Click OK on the Add Policy dialog box.
6. Click Close on the MAPS Configuration dialog box.
1356
Configure.
The MAPS Configuration dialog box displays.
You can also select the switch in the list and select Edit to edit the active policy. When you edit
the active policy on the switch, updated rules activate on the switch automatically.
NOTE
You cannot edit a default policy.
The Edit Policy dialog box displays.
The rule displays in the Add/Edit Threshold area. Note that this removes the rule from the
associated group, once you edit the rule, you must add it back to the group (refer to
"Configuring a MAPS policy"
"Editing a group"
dialog box.
Configure.
The MAPS Configuration dialog box displays.
The Add Policy dialog box displays.
The policy name can be up to 32 characters and can only contain of alphanumeric and
underscore characters.
through
step
12.
on page 1353 and complete
on page 1369.
"Configuring a MAPS policy"
step 5
through
step
11).
on page 1353 and complete
Brocade Network Advisor SAN User Manual
53-1003154-01
step 4