Front Inner Remote - Subaru 2003 LEGACY Service Manual

FRONT INNER REMOTE

SECURITY AND LOCKS
4. Front Inner Remote
A: REMOVAL
1) Remove the door trim. <Ref. to EI-30, REMOV-
AL, Front Door Trim.>
2) Remove the sealing cover. <Ref. to EB-13, RE-
MOVAL, Front Sealing Cover.>
3) Remove the two rod joints.
4) Remove the screw, and detach the front inner
remote.
SL-00072
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
Make sure the inner remote works properly after in-
stallation.
C: INSPECTION
1) Make sure the rod is not deformed.
2) Make sure the lever and rod work smoothly.
SL-19