Fast: Options  Set Register1 Or Set Register - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Front Panel Operation
► Open Network Framing
► Modulation:

8-ARY

16-ARY
► Drop & Insert:

1-port D&I

4-port (Quad) D&
► L-Band
► IP-ACM (Adaptive Coding Modulation)
► Data Rate when configured for Header Compression
► Data Rate when configured for Payload Compression
► G.703 Clock Extension
► Advanced QoS (Quality of Service)
► AES Encryption
► Fractional CnC (DoubleTalk Carrier-in-Carrier)
► Advanced Network Timing (PTP – Precision Timing Protocol)
► Carrier ID
► CnC Activation
6.2.8.1.2 FAST: Options  Set Register1 or Set Register 2
Chapter 5. FAST ACTIVATION PROCEDURE
FAST: Set register#:
88888888888888888888
Where '#' is '1' or '2': Use FAST: Options  Set Register1 and Set Register 2 to enable new
options in the modem on a per-register basis. It is important to use the appropriate FAST access
code for the appropriate register.
Contact Comtech EF Data Product Support to order the desired options (see Sect. 6.2.8.1.1) – be
prepared to provide the Modem Serial Number. The Comtech EF Data Product Support
representative will verify the order and provide an invoice and instructions, including a register-
specific 20-digit FAST Access Code.
Enter the FAST Access Code that you have obtained from Comtech EF Data carefully using the
front panel keypad or, alternately, the CDM-625A Web Server (HTTP) Interface:
Enter code below
then [ENTER] ()
6–90
Revision 0
MN-CDM625A