CDM-625A Advanced Satellite Modem
Telnet Command Line Interface (CLI) Operation
9.1.2 Terminal Emulator Considerations
1. For best results, Comtech EF Data recommends PuTTY or TeraTerm as the
preferred terminal emulators.
2. Use of the HyperTerminal terminal emulator is not supported or recommended.
3. The numeric keypad's ENTER key may not work on some terminal emulators.
9.1.2.1
Using the PuTTY Terminal Emulator
First, you must define your Telnet session connection:
For Connection type, select Telnet;
•
•
For Host Name (or IP Address), enter the interface IP Address (e.g., 192.168.1.11);
•
For Port, enter 107;
•
Click [Open] to proceed.
9–2
Revision 0
MN-CDM625A
Need help?
Do you have a question about the CDM-625A and is the answer not in the manual?
Questions and answers