Miscellaneous; Approvals - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
Introduction
1.4.9

Miscellaneous

Front Panel
Loopbacks
Fault relays
M&C Interface
M&C Software
Firmware update
Dimensions
Weight
AC consumption
AC operating voltage
DC consumption (option)
DC operating voltage
Operating temperature

1.4.10 Approvals

"CE" as follows:
FCC
Tactile keypad, 6 keys (Up/Down), Left/Right, Enter/Clear)
Vacuum Fluorescent Display (blue) – 2 lines of 40 characters
Internal IF loopback, RF loopback, digital loopback, and inward/outward loopback
Hardware fault, Rx and Tx Traffic Alarms, Open Network Backward Alarms
Type: Form C Contacts. Rating: Up to +/-50 volts, max 0.5 Amp
EIA-232 and EIA-485 (addressable multidrop, 2-wire or 4-wire) or Ethernet (10/100 BaseT)
Serial comms, SNMP, Telnet, Web Server (HTTP)
FTP protocol via Ethernet port
1RU high, 17.65 inches (448 mm) deep
10.5 lbs (4.8 kg) max (All option cards and 48V BUC supply installed)
48 watts (typical, TPC/LDPC Codec and CnC module installed), 68watts (maximum)
280 watts (typical TPC/LDPC Codec, CnC module and 48 volt BUC supply installed, 300 watts (max)
100 - 240 VAC Nominal - autosensing
90 – 264 VAC Maximum
As above (AC consumption)
43-60 VDC Nominal
36 – 60 VDC Maximum
0 to 50ºC (32 to 122ºF)
EN 55022 Class B
(Emissions)
EN 50082-1 (Immunity)
EN 60950-1 (Safety)
Federal Communications Commission Federal Code of Regulation FCC Part 15, Subpart B.
EN 61000-3-2
EN 61000-3-3
EN 61000-4-2
EN 61000-4-4
EN 61000-4-5
1–30
Revision 0
MN-CDM625A
EN 61000-4-6
EN 61000-4-8
EN 61000-4-9
EN 61000-4-11
EN 61000-4-13