Comtech EF Data CDM-625A Installation And Operation Manual page 107

CDM-625A Advanced Satellite Modem
FAST Activation Procedure
Step Task
3 Contact Comtech EF Data Product Support to order features:
•
•
•
4 Typical for either option register (Register1 or Register2), enter the FAST Access Code (each FAST
Access Code is submitted separately):
a)
b)
The m essage " Configured Successfully" appears at t he t op o f t he FAST code section i f t he FAST
upgrade is accepted; the modem then resets to its newly-incorporated default configuration.
However, if an invalid code is entered, either of the following messages may appear instead:
Repeat the FAST Access Code entry procedure. Should the code entry error persist, contact Comtech EF
Data Product Support for further assistance.
Provide the unit Serial Number to the Product Support representative.
Identify and purchase the desired FAST option(s).
Obtain the invoice, the register-specific 20-digit FAST Access Code(s), and t he FAST option
activation instructions.
When a FAST Access Code is obtained from Comtech EF Data, it will be for a
specific option register. The FAST options are linked to two option registers:
Register1 is for Data Rate, L-Band, and Framing options.
•
Register2 is for Modulation type and IP Packet Processor options.
•
In t he ' Admin | F AST' page FAST code section, carefully enter the register-specific 20-
character FAST Access Code into its designated text box (Register 1 or Register 2).
Click [Submit].
5–5
Revision 0
MN-CDM625A