Odu: Fsk-Control  Kst; Odu: Fsk-Control  Kst  Configuration; Odu: Fsk-Control  Kst  Configuration  Tx; Odu: Fsk-Control  Kst  Configuration  Rx - Comtech EF Data CDM-625A Installation And Operation Manual

CDM-625A Advanced Satellite Modem
CDM-625A ODU (Transceiver, BUC, LNB) Operation
10.3.3.3.3.3 ODU: FSK-control  KST
KST Select:
Configuration
Use the ◄ ► arrow keys to select Configuration, Information, or Alarms, and then press ENTER.
ODU: FSK-control  KST  Configuration
10.3.3.3.3.3.1
KST Config:
Use the ◄ ► arrow keys to select Tx, Rx, or Miscellaneous, and then press ENTER.
10.3.3.3.3.3.1.1
Tx:Off
Use the ◄ ► arrow keys to select Tx, Freq, Att, or AGC, and then use the
that setting. Press ENTER when done.
10.3.3.3.3.3.1.2
Rx: Freq=11950 MHz
Note that Rx Band is not shown for the KST-2000A.
◄ ► arrow keys to select Freq, Att, Ref, or Band (KST-2000B only), and then use the
Use the
arrow keys to edit that setting. Press ENTER when done.
▲▼
10.3.3.3.3.3.1.3
HPA:Off
LNA:OFF
◄ ►
Use the arrow keys to select HPA, (HPA) Fault-Logic-Summary, LNA, (LNA) Fault-Logic-
Summary, or Cal, and then use the
Selection
HPA
Information
Tx Rx Miscellaneous
ODU: FSK-control  KST  Configuration  Tx
Freq=13955 MHz
ODU: FSK-control  KST  Configuration  Rx
Band=B
ODU: FSK-control
Miscellaneous
Fault-Logic=Summary
Fault-Logic=Summary
▲▼
Setting
(HPA power enable) Select Off or On.
Alarms ()
Att=23 dB
AGC=Off ()
Att=20 dB

KST
arrow keys to edit that setting:
10–23
MN-CDM625A
()
arrow keys to edit
▲▼
Ref=087
()

Configuration
Cal:No
Revision 0
