Select: Test  Bert; Select: Test  Bert  Config; Select: Test  Bert  Monitor; Select: Test  Cnc-Apc-Monitor - Comtech EF Data CDM-625A Installation And Operation Manual

Advanced satellite modem (18 kbps – 25 mbps)

Hide thumbs Also See for CDM-625A:

Table of Contents

CDM-625A Advanced Satellite Modem

Front Panel Operation

SELECT: TEST  BERT

BERT: Config

arrow keys to select Config or Monitor, and then press ENTER.

6.2.2.2.1 SELECT: TEST  BERT  Config

arrow keys to select a BERT configuration parameter, and then use the

keys to select a parameter setting. The configuration options are as follows:

Tx/Rx Options

ErrIns Options

Pattern Options

6.2.2.2.2 SELECT: TEST  BERT  Monitor

BERT Monitor:

Press ENTER to restart the BERT Monitor.

SELECT: TEST  CnC-APC-Monitor

CNC-APC: BER=N/A

The test results provided on this screen are as follows:

To restart either Test, use the

press ENTER.

Pattern=2047

Pattern=2047

Off or 10E-3

Space, Mark, 1:1, 1:2, 63, 511, 2047, 2047R, MIL188, 2

Errs=0000000

Bit Error Rate

Frame Error Rate

arrow keys to select (BER) Reset or (FER) Reset, and then

Chapters

Table of Contents