PT
G288 MANUAL TRANSAXLE (Continued)
(9) Remove transaxle upper bellhousing-to-block
bolts.
(10) Raise vehicle on hoist.
(11) Remove transaxle drain plug and drain into
suitable container (Fig. 32).
(12) Remove halfshafts (Fig. 33).
(13) Remove three (3) intermediate shaft bearing-
to-retainer bolts. Remove intermediate shaft/bearing
assembly (Fig. 33).
1 - HALFSHAFT (LH)
2 - TRANSAXLE
3 - BOLT
Fig. 33 Halfshaft and Intermediate Shaft
G288 MANUAL TRANSAXLE
Fig. 32 Transaxle Fluid Drain and Fill Plugs
1 - FILL PLUG
2 - DRAIN PLUG
3 - RIGHT AXLE SEAL
4 - INTERMEDIATE SHAFT
5 - HALFSHAFT (RH)
6 - BOLT (2)
21 - 19