13 - 2
FRAMES & BUMPERS
FRONT BUMPER FASCIA
REMOVAL
(1) Remove Grille Attaching screws.
(2) Remove Grille.
(3) Remove nuts attaching front bumper fascia to
bottom of fender flange (Fig. 2).
(4) Remove fasteners attaching fascia to fender
flange (Fig. 3).
(5) Remove air dam fasteners from crossmember.
(6) Remove splash shield attaching screws.
(7) Remove fascia from vehicle.
INSTALLATION
(1) Position fascia on vehicle (Fig. 2).
(2) Install splash shield attaching screws.
(3) Install air dam fasteners to crossmember.
(4) Install fasteners attaching fascia to fender
flange (Fig. 3).
(5) Install nuts attaching front bumper fascia to
bottom of fender flange.
(6) Install Grille and attaching screws.
1 - FRONT BUMPER FASCIA
2 - FRONT BUMPER ENERGY FOAM
3 - RADIATOR AIR DAM
1 - ATTACHING POINTS
2 - FRONT FASCIA
Fig. 2 FRONT BUMPER FASCIA
Fig. 3 FRONT FASCIA ATTACHING POINTS
PT