Chrysler PT Cruiser Service & Repair Manual page 1087

PT
TIMING CHAIN COVER (Continued)
Fig. 111 Timing Chain Cover Seals
1 - TIMING CHAIN COVER SEALS
2 - OIL PUMP
3 - PRESSURE RELIEF VALVE
Fig. 112 Timing Chain Cover Sealing - RTV Location
1 - 3.2 mm (0.125 in.) BEAD OF RTV AT PARTING LINE
2 - PARTING LINE OF ENGINE BLOCK/BEDPLATE
(8) Install the accessory drive belt idler pulley(Re-
fer to 7 - COOLING/ACCESSORY DRIVE/IDLER
PULLEY - INSTALLATION).
(9) Install the accessory drive belt tensioner (Refer
to 7 - COOLING/ACCESSORY DRIVE/BELT TEN-
SIONERS - INSTALLATION).
Fig. 113 Timing Chain Cover Tightening Sequence
(10) Install the crankshaft vibration damper (Refer
to 9 - ENGINE/ENGINE
DAMPER - INSTALLATION).
(11) Install the accessory drive belt (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
INSTALLATION).
(12) Install the accessory drive belt splash shield.
(13) Install the right front wheel.
(14) Lower vehicle.
(15) Install the radiator cooling fan (Refer to 7 -
COOLING/ENGINE/RADIATOR FAN - INSTALLA-
TION).
(16) Connect upper radiator hose.
(17) Install the power steering reservoir bracket
bolts.
(18) Connect the negative battery cable.
(19) Fill the cooling system (Refer to 7 - COOL-
ING/ENGINE - STANDARD PROCEDURE).
TIMING CHAIN/GUIDES/
SPROCKETS
REMOVAL
REMOVAL - TIMING CHAIN AND GUIDES
(1) Disconnect negative battery cable.
(2) Remove cylinder head cover (Refer to 9 -
ENGINE/CYLINDER
COVER(S) - REMOVAL).
(3) Remove camshaft position sensor.
ENGINE 1.6L SOHC
BLOCK/VIBRATION
HEAD/CYLINDER
9 - 67
HEAD