Chrysler PT Cruiser Service & Repair Manual page 1800

23 - 72 SEATS
REAR SEAT BACK CUSHION / COVER (Continued)
(8) Remove seat cushion cover from seat cushion.
INSTALLATION
(1) Position seat cover on cushion.
(2) Align seat cover with cushion alignment inden-
tations.
(3) Install hog rings.
(4) Engage J-strap attaching seat cover to front of
seat cushion frame.
(5) Install track assembly. Tighten front track to
pan bolts to 12 N·m (9 ft. lbs.) torque.
(6) Install seat back.
(7) Install rear seat cushion side shields.
(8) Install seat in vehicle.
UNDER SEAT STORAGE BIN
REMOVAL
(1) Open cargo bin.
(2) Pull cargo bin out until it reaches the end of
the guide (Fig. 5).
(3) Lift upward on cargo bin and remove.
Fig. 5 CARGO BIN
1 - CARGO BIN TRACK
2 - CARGO BIN
3 - SEAT TRIM
INSTALLATION
(1) Position cargo bin into cargo bin guides.
(2) Lift upward on front of cargo bin to engage
cargo bin stop.
(3) Slide cargo bin to the fully closed position (Fig.
6).
Fig. 6 CARGO BIN GUIDE
1 - CARGO BIN STOP - SEAT SIDE
2 - CARGO BIN STOP - CARGO BIN SIDE
3 - CARGO BIN
4 - CARGO BIN GUIDE
REAR SEAT PIVOT BEZEL
REMOVAL
(1) Fold the rear seats forward.
(2) Remove the seat to access the proper bezel.
(3) Using a trim stick, to disengage bezel(s).
(4) Remove bezel from vehicle.
INSTALLATION
(1) Place bezel(s) into position.
(2) Press down to engage bezel(s) into position.
(3) Install rear seat(s).
(4) Place rear seats into position.
PT