Chrysler PT Cruiser Service & Repair Manual page 1791

PT
UPPER C-PILLAR TRIM
REMOVAL
(1) Disengage clips attaching trim to C-pillar (Fig.
6).
(2) Remove upper trim panel from vehicle.
Fig. 6 UPPER C-PILLAR TRIM PANEL
1 - C-PILLAR UPPER TRIM PANEL
2 - REAR QUARTER PANEL
3 - D-PILLAR UPPER TRIM PANEL
4 - QUARTER LOWER TRIM PANEL
5 - JACK STORAGE ACCESS DOOR
6 - QUARTER TRIM PANEL LOWER PLUG
7 - VERTICAL BUMPER
INSTALLATION
(1) Place C-pillar trim panel in position (Fig. 6) .
(2) Push clips on trim panel into slots in upper
C-pillar panel.
DOOR SILL TRIM
REMOVAL
(1) Open door to gain access to sill trim.
(2) Disengage clips attaching sill trim to door sill
and door opening flange.
(3) Remove door sill trim from vehicle (Fig. 7).
INSTALLATION
(1) Position door sill trim on door sill (Fig. 7) .
(2) Align locating pins on backside of trim panel to
holes in door sill.
(3) Engage clips on trim panel into slots in door
sill.
(4) Engage clips on trim panel onto door opening
flange.
Fig. 7 DOOR SILL TRIM
1 - SILL SCUFF PLATE ATTACHING NUT
2 - FRONT DOOR SILL SCUFF PLATE
3 - FRONT SILL SCUFF PROTECTOR - RHD
4 - B-PILLAR
5 - B-PILLAR SEAT BELT ACCESS COVER
6 - REAR DOOR SILL SCUFF PLATE
7 - CLOSE OUT COVER
(5) Press downward on trim panel to fully engage
all clips.
UPPER D-PILLAR TRIM
REMOVAL
(1) Disengage clips attaching trim to D-pillar (Fig.
6) .
(2) Remove upper trim panel from vehicle.
INSTALLATION
(1) Place D-pillar trim panel in position (Fig. 6) .
(2) Push clips on trim panel into slots in upper
D-pillar panel.
HEADLINER
REMOVAL
(1) Remove screws attaching sun visors to roof
header panel (Fig. 8).
(2) Disconnect wire connector from lighted vanity
mirror, if so equipped.
(3) Remove trim lace, if equipped with sun roof.
(4) Remove sun visors from vehicle.
(5) Remove A-pillar trim covers.
(6) Remove B-pillar trim panels.
(7) Remove C-pillar and D-pillar trim panels.
(8) Remove assist handle, if so equipped.
INTERIOR 23 - 63