Crankshaft Oil Seal - Rear Removal; Installation - Chrysler PT Cruiser Service & Repair Manual

Hide thumbs Also See for PT Cruiser:

Table of Contents

CRANKSHAFT OIL SEAL - FRONT (Continued)

Fig. 69 Front Crankshaft Oil Seal - Removal

1 - SPECIAL TOOL 6771

2 - REAR TIMING BELT COVER

Fig. 70 Crankshaft Front Oil Seal - Installation

1 - PROTECTOR

3 - SPECIAL TOOL 6780

ENGINE 2.4L DOHC

Fig. 71 Crankshaft Sprocket - Installation

1 - SPECIAL TOOL 6792

2 - TIGHTEN NUT TO INSTALL

CRANKSHAFT OIL SEAL -

(1) Remove transaxle. Refer to TRANSMISSION/

TRANSAXLE - REMOVAL for procedure.

(2) Remove flex plate.

(3) Insert a 3/16 flat bladed screwdriver between

the dust lip and the metal case of the crankshaft

seal. Angle the screwdriver (Fig. 72) through the dust

lip against metal case of the seal. Pry out seal.

CAUTION: Do not permit the screwdriver blade to

contact crankshaft seal surface. Contact of the

screwdriver blade against crankshaft edge (cham-

fer) is permitted.

CAUTION: If burr or scratch is present on the

crankshaft edge (chamfer), cleanup with 400 grit

sand paper to prevent seal damage during installa-

tion of new seal.

NOTE: When installing seal, no lube on seal is

Show Quick Links

Chapters

Table of Contents