Chrysler PT Cruiser Service & Repair Manual page 1581

Hide thumbs Also See for PT Cruiser:

Table of Contents

41TE AUTOMATIC TRANSAXLE (Continued)

Fig. 47 Number 7 Bearing

1 - #7 NEEDLE BEARING

2 - REAR SUN GEAR

(27) Setup tool 5058 as shown in (Fig. 48). Com-

press 2/4 clutch return spring (just enough to remove

snap ring) and remove snap ring.

NOTE: Verify that Tool 5058 is centered properly

over the 2/4 clutch retainer before compressing. If

necessary, fasten the 5058 bar to the bellhousing

flange with any combination of locking pliers and

bolts to center the tool properly.

Fig. 48 Remove 2/4 Clutch Retainer Snap Ring

1 - TOOL 5058

2 - SCREWDRIVER

3 - SNAP RING

4 - 2/4 CLUTCH RETAINER

41TE AUTOMATIC TRANSAXLE

(28) Remove 2/4 clutch retainer (Fig. 49).

Fig. 49 2/4 Clutch Retainer

1 - 2/4 CLUTCH RETAINER

2 - 2/4 CLUTCH RETURN SPRING

(29) Remove 2/4 clutch return spring (Fig. 50).

Fig. 50 Remove 2/4 Clutch Return Spring

1 - 2/4 CLUTCH RETURN SPRING

Show Quick Links

Chapters

Table of Contents