Chrysler PT Cruiser Service & Repair Manual page 1599

PT
41TE AUTOMATIC TRANSAXLE (Continued)
(18) Install output gear stirrup with serrated side
out (Fig. 113).
Fig. 113 Install Stirrup
1 - STIRRUP
2 - OUTPUT GEAR RETAINING BOLT
(19) Install retaining strap.
(20) Install strap bolts but do not tighten at this
time (Fig. 114).
Fig. 114 Install Strap Bolts
1 - RETAINING STRAP
2 - STIRRUP
3 - RETAINING STRAP BOLTS
41TE AUTOMATIC TRANSAXLE
(21) Rotate stirrup clockwise against flats of
retaining bolt (Fig. 115).
Fig. 115 Turn Stirrup Clockwise Against Bolt Flats
1 - RETAINING STRAP
2 - STIRRUP
(22) Torque stirrup strap bolts to 23 N·m (200 in.
lbs.) (Fig. 116).
Fig. 116 Tighten Stirrup Strap Bolts To 23 N·m (200
1 - RETAINING STRAP
2 - STIRRUP
21 - 187
in.) lbs.)