Chrysler PT Cruiser Service & Repair Manual page 1661

PT
INPUT CLUTCH ASSEMBLY (Continued)
(4) Install the OD/Reverse piston assembly to the
input clutch retainer as shown in (Fig. 230).
Fig. 230 Install OD/Reverse Piston
1 - PUSH DOWN TO INSTALL OVERDRIVE/REVERSE PISTON
2 - INPUT CLUTCHES RETAINER
(5) Install the input hub/shaft assy. to the OD/Re-
verse piston/clutch retainer assy. (Fig. 231).
Fig. 231 Install Input Shaft Hub Assembly
1 - PUSH DOWN TO INSTALL INPUT SHAFT HUB ASSEMBLY
(ROTATE TO ALIGN SPLINES)
2 - OD/REV. PISTON
41TE AUTOMATIC TRANSAXLE
(6) Install input hub tapered snap ring (Fig. 232)
(Fig. 233).
Fig. 232 Install Input Hub Tapered Snap Ring
1 - INPUT SHAFT
2 - INPUT HUB SNAP RING (TAPERED SIDE UP WITH TABS IN
CAVITY)
3 - SNAP RING PLIERS
21 - 249