Chrysler PT Cruiser Service & Repair Manual page 1147

PT
LUBRICATION (Continued)
1 - O-RING
2 - OIL FILTER ADAPTER
3 - OIL PAN GASKET
4 - OIL PAN
5 - OIL PICK-UP TUBE
6 - DRAIN PLUG
(4) Monitor gauge readings at idle and 3000 rpm.
Oil Pressure: Idle 25 kPa (4 psi) minimum, 3000
RPM 170-550 kPa (25-80 psi).
(5) If oil pressure is 0 at idle, shut off engine and
check the following:
• Pressure relief valve stuck open
• Clogged oil pick-up screen
• Damaged oil pick-up tube O-ring
Fig. 94 Engine Lubrication Components
7 - O-RING
8 - OIL PUMP BODY
9 - FILTER
10 - O-RING
11 - NIPPLE
ENGINE 2.0L DOHC
Fig. 95 Engine Lubrication System
1 - RESTRICTOR
9 - 127