Chrysler PT Cruiser Service & Repair Manual page 1578

21 - 166 41TE AUTOMATIC TRANSAXLE
41TE AUTOMATIC TRANSAXLE (Continued)
(16) Remove oil pump-to-case bolts (Fig. 35).
Fig. 35 Remove Pump Attaching Bolts
1 - PUMP ATTACHING BOLTS
2 - PUMP HOUSING
CAUTION: Be sure input speed sensor is removed
before removing oil pump.
(17) Install pullers Tool C-3752 as shown in (Fig.
36).
Fig. 36 Install Tool C-3752
1 - PULLERS TOOL C-3752
2 - PUMP
(18) Remove oil pump assembly (Fig. 37) (Fig. 38).
Fig. 37 Remove Oil Pump
1 - "PUSH IN" ON INPUT SHAFT WHILE REMOVING PUMP
(19) Remove oil pump gasket (Fig. 39).
Fig. 38 Oil Pump Removed
1 - OIL PUMP
2 - GASKET
CAUTION: If transaxle failure has occurred, the
cooler bypass valve must be replaced. Do not
re-use or attempt to clean valve.
PT