Chrysler PT Cruiser Service & Repair Manual page 1607

Hide thumbs Also See for PT Cruiser:

Table of Contents

41TE AUTOMATIC TRANSAXLE (Continued)

(45) Orient 2/4 clutch return spring to retainer as

shown in (Fig. 138), and install to transaxle (Fig.

Fig. 138 Proper Orientation of 2/4 Clutch Retainer

1 - NOTE POSITION

2 - RETURN SPRING

3 - 2/4 CLUTCH RETAINER

Fig. 139 2/4 Clutch Retainer

1 - 2/4 CLUTCH RETAINER

2 - 2/4 CLUTCH RETURN SPRING

(46) Using tool 5058, compress 2/4 clutch return

spring just enough to install snap ring (Fig. 140).

(47) Install snap ring.

41TE AUTOMATIC TRANSAXLE

Fig. 140 Install 2/4 Clutch Retainer Snap Ring

1 - TOOL 5058

2 - SCREWDRIVER

3 - SNAP RING

4 - 2/4 CLUTCH RETAINER

(48) Set up dial indicator as shown in (Fig. 141)

and measure 2/4 clutch clearance. Press down on

clutch pack with finger and zero dial indicator. 2/4

(0.030-0.104 in.). Set up indicator and record mea-

surement in four (4) places. Take average of read-

ings. If clearance is outside this range, the clutch is

assembled improperly. There is no adjustment for

2/4 clutch clearance.

Fig. 141 Check 2/4 Clutch Clearance

1 - DIAL INDICATOR

2 - HOOK TOOL

3 - DIAL INDICATOR TIP TOOL 6268

Show Quick Links

Chapters

Table of Contents