Chrysler PT Cruiser Service & Repair Manual page 1547

PT
GEAR SHIFT MECHANISM (Continued)
Fig. 124 Center Console Removal/Installation—
1 - CENTER CONSOLE
Fig. 125 Crossover Cable at Shifter Assembly
1 - GROMMET PLATE NUT
2 - SHIFTER
3 - CROSSOVER CABLE
4 - CLIP
(5) Install center console assembly (Fig. 124).
Install rear power window switch (if equipped) and
fasten harness to console.
(6) Position gearshift boot (Fig. 123) over the gear-
shift mechanism and engage tab on mount ring at
Typical
T350 MANUAL TRANSAXLE
Fig. 126 Selector Cable at Shifter Assembly
1 - SHIFTER
2 - CLIP
3 - SELECTOR CABLE
Fig. 127 Shifter Assy. Removal/Installation
1 - SHIFTER ASSEMBLY
front to opening in console. Apply hand pressure to
engage bosses on mount ring of boot to console open-
ing slots.
(7) Position gearshift knob hole over the gearshift
mechanism (Fig. 122) and align the shift pattern.
(8) Strike knob with rubber mallet to engage knob
to mechanism.
(9) Verify that shift pattern is aligned properly.
21 - 135