PT
VALVE BODY (Continued)
(4) Verify that all retainers are installed as shown
in (Fig. 358). Retainers should be flush or below
valve body surface.
(5) Install check balls into position as shown in
(Fig. 359). If necessary, secure them with petrolatum
or transmission assembly gel for assembly ease.
1 - (#4) BALL CHECK LOCATION
2 - (#2) BALL CHECK LOCATION
3 - RETAINER
1 - RETAINER
2 - RETAINER
Fig. 359 Ball Check Location
4 - (#3) BALL CHECK LOCATION
5 - LOW/REVERSE SWITCH VALVE
6 - T/C LIMIT VALVE
41TE AUTOMATIC TRANSAXLE
Fig. 358 Valve Retainer Location
21 - 297