Installation - Crankshaft Sprocket - Chrysler PT Cruiser Service & Repair Manual

PT
TIMING CHAIN/GUIDES/SPROCKETS (Continued)
Fig. 117 Identify Timing Chain Link for Reassembly
Purposes
1 - PAINT THE LINK THAT ALIGNS WITH TIMING MARK
2 - CAMSHAFT SPROCKET TIMING MARK
REMOVAL - CRANKSHAFT SPROCKET
(1) Remove timing chain (Refer to 9 - ENGINE/
VALVE TIMING/TIMING CHAIN - REMOVAL).
(2) Remove crankshaft sprocket by first installing
crankshaft vibration damper bolt. Apply grease or
equivalent to damper bolt head and position Special
Tools 5048-1, 5048-6, and 8539 on sprocket and
crankshaft nose (Fig. 118).
(3) Remove sprocket using care not to rotate the
crankshaft.
INSTALLATION

INSTALLATION - CRANKSHAFT SPROCKET

(1) Install crankshaft sprocket using Special Tools
8385 and 8386 (Fig. 119).
(2) Install sprocket using care not to rotate the
crankshaft.
INSTALLATION - CAMSHAFT SPROCKET
(1) Align triangular timing mark on cam sprocket
with the timing chain link that was painted during
disassembly. Install timing chain on cam sprocket
(Fig. 117).
(2) Install camshaft sprocket on the camshaft.
CAUTION: Do Not use an impact wrench for tight-
ening the camshaft sprocket bolt. Damage to the
camshaft timing pin can result. Use a hand wrench
only.
ENGINE 1.6L SOHC
Fig. 118 Crankshaft Sprocket Removal
1 - SPECIAL TOOL 5048-6
2 - SPECIAL TOOL 8539
3 - SPECIAL TOOL 5048-1
Fig. 119 Crankshaft Sprocket Installation
1 - SPECIAL TOOL 8386
2 - SPECIAL TOOL 8385
9 - 69