Symptom Table - Output Expander Option; Symptom Table - 5-Bin Mailbox Option - Toshiba e-STUDIO 20CP Service Manual

Symptom
Elevator does not move
HCIT does not recognize the correct paper size

Symptom Table - Output Expander Option

Symptom
The printer fails to recognize the option is installed.
The paper feeds into the standard bin.
The printer does not display "Output Bin Full"
The printer does not feed all the way into the output
tray
Excessive Static electricity buildup

Symptom Table - 5-Bin Mailbox Option

Symptom
Printer fails to recognize the option is installed. The
paper feeds into the standard bin.
The printer does not display "Output Bin(s) Full"
The media does not feed into selected output bin
"Check Bin X" displays
Excessive static electricity buildup
Bin X is full but no message displays that Bin X is
full
"Bin X Full" message displays. You may be able to
feed media into Bin X
5060-XXX
Action
Go to the "HCIT 2000 Sheet Option Service
Check" on page
Go to the "HCIT 2000 Sheet Option Service
Check" on page
Action
Go to "Output Expander Option Service Check"
on page 2-56
Go to "Output Expander Option Service Check"
on page 2-56
Go to "Output Expander Option Service Check"
on page 2-56
Go to "Output Expander Option Service Check"
on page 2-56
Action
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
Go to "5-Bin Mailbox Option Service Check" on
page 2-63
2-119.
2-119.
Diagnostic Information
2-5