Table of Contents
Advertisement
Print Quality Test Pages
The print quality test has five pages of settings, various color blocks, color array scales,
and color gradients.
This test may be printed from either Configuration Menu or the Diagnostic Test Menu.
When printed from the Configuration Menu, the toner cartridge lockout function is
enabled, which means these pages cannot be printed unless a cartridge is installed with
a Machine Class ID which matches the Machine Class ID stored in the printer NVRAM.
When printed from the Diagnostic Test Menu the toner cartridge lockout function is
disabled.
To run the Print Quality Test page from the Diagnostic menu, select Print Quality Test
Pages from the menu. Once the test is started it cannot be cancelled. When the test
pages print the printer returns to the original screen.
Print Line Length Page
This test prints a color test page that is used to measure the temperature of the
printheads and the reading from the PSD at calibration time.
To run the Print Line Length Page, select Print Line Length Page from the menu. No
buttons are active while the Print Line Length Page is printing. Press Return to exit.
Print Registration
The print registration range is as follows:
To set Print Registration:
1.
2.
3.
4.
To verify the margin values are correct you must print the "Quick Test Page" from the
registration screen. Press Go to print the test page. While printing the "Quick Test
Printing" message displays. Once printing is complete, the Registration screen displays.
The "Quick Test Page" should be printed on letter or A4 paper.
3-22
Service Manual
Bottom Margin: -25 to +25
Top Margin: -25 to +25
Left Margin: -12 to +12
Right Margin: -12 to +12
Select Registration from the Diagnostic menu.
The Top margin sign/value pair blinks. This indicates it is the margin value being
changed.
To select the margin value to change, press Select until the margin value pair you
want to change is blinking.
To change the margin value press Menu. When the value you want is displayed,
press Select to save the value.To exit the Registration menu, press Return.
5060-XXX
Advertisement
Table of Contents
