Table of Contents
Advertisement
User Primary
Message
58 Too Many Disks
Installed
58 Too Many Flash
Options
59 Incompatible
Output Bin x
59 Incompatible Tray x
61 Defective Disk
5060-XXX
User Secondary Message
Explanation
This message will be displayed when too many
disks have been installed.
Note: Some configurations of different output
options require the installation of one option
before the other.
This message will be displayed when too many
Flash Options have been installed. Check for the
maximum number of flash memory options which
may be installed.
Note: For this error you may press Go to clear the
message. The extra flash memory options will be
ignored.
These messages will be displayed when the user
installs an incompatible option.
The following options may be incompatible for
use on one or more 50xx models:
Output Bix x(x=1, 2 or 3)
Tray x(x=2,3,4 or 5)
Duplex
The following actions can be taken while this
message is being displayed:
* The user is required to remove the incompatible
option and press Go to clear the message.
Note: If the user has installed the incompatible
option to satisfy a "Check Option Connections/
Reattach Option" attendance condition, the user
must reinstall an associated compatible option or
Hot Unplug the option.
This message will be displayed when the printer
detects a defective disk. This error may occur at
power on, or during disk format and write
operations.
The following actions can be taken while this
message is displayed:
* Press Go to clear the message.
The disk will be marked as defective and normal
printer operation will continue.
Disk operations will not be allowed with a
defective disk and the Format Disk menu item will
not be shown.
Diagnostic Information
2-43
Advertisement
Table of Contents
