Sub Error Code Table - Toshiba e-STUDIO 20CP Service Manual

Sub Error Code Table

The Sub-Error code table may be helpful troubleshooting the printer when 9xx and 1xx
Error Codes have been displayed.
When a 9xx or 1xx Error Code is displayed, press and hold Return and press Select to
view the Sub Error Code.
Sub Error Code Explanation
2D 00 No media available in Duplex unit.
2D 02 Paper jam detected. Sensor S2 was activated at an unexpected time.
2D 03 Paper jam detected. Sensor S2 was not activated within the time-out period.
2D 04 Paper jam detected. Sensor S2 did not deactivate during the time-out period.
2D 05 Paper jam detected. Sensor NM was activated at an unexpected time.
2D 06 Paper jam detected. Sensor NM did not deactivate during the time-out period.
2D 07 Paper jam detected. The fuser exit sensor was activated at an unexpected time.
2D 08 Paper jam detected. The fuser exit sensor did not deactivate by the previous page or
the current page did not activate the fuser exit sensor within the time-out period.
2D 09 Paper jam detected. The fuser exit sensor did not deactivate during the time-out period.
2D 0A Paper jam detected. A paper jam detected in the Duplex unit.
2D 0B Paper jam detected. A paper jam detected in Tray 2.
2D 0C Paper jam detected. A paper jam detected in Tray 3.
2D 0D Paper jam detected. A paper jam detected in Tray 4.
2D 14 Prism Sensor detected different media from the tray sensor.
2D 15 Paper jam detected. A paper jam detected in Stacker 1.
2D 16 Paper jam detected. A paper jam detected in Stacker 2.
2D 17 Paper jam detected. A paper jam detected in Stacker 3.
2D 18 Paper jam detected. A paper jam detected in Stacker 4.
2D 19 Paper jam detected. A paper jam detected in Stacker 5.
2D 1A Paper jam detected. A paper jam detected in Stacker 6.
2D 1B Sensor (S2) has been activated or an obstructed.
2D 1C Fuser narrow media sensor obstructed.
2D 1D Fuser exit sensor obstructed.
2D 1E Duplex Senor(s) obstructed.
2D 1F Tray 2 sensor obstructed.
2-18
Service Manual
5060-XXX