Size Sensing; Type Sensing; Sensed Paper - Toshiba e-STUDIO 20CP Service Manual

Size Sensing

Only paper sources that support Auto Size Sensing are displayed.
1.
Enter the Configuration Menu and Select Size Sensing.
2.
One of the following is displayed:
Tray 1 Sensing
Tray 2 Sensing
Tray 3 Sensing
Tray 4 Sensing
=Auto*
=Off
Select the value you want from the list above.

Type Sensing

Only paper sources that support Auto Type Sensing are displayed.
Enter the configuration Menu and select Type Sensing.
One of the following is displayed:
Tray 1
Tray 2
Tray 3
Tray 4
=Transparency*
=Custom Type 5
Select the value you want from the above list.

Sensed Paper

Only paper sources that support Auto Type Sensing are displayed. The factory default
paper type or each tray is determined by the value of Configuration ID.
This value is as follows:
Tray 1 factory default paper type = Plain Paper
Tray 2 factory default paper type = Plain Paper or Custom Type 2
Tray 3 factory default paper type = Plain Paper or Custom Type 3
Tray 4 factory default paper type = Plain Paper or Custom Type 4
The following media can be sensed by Tray 1, Tray 2, Tray 3 and Tray 4:
Plain Paper, Glossy Paper, Card Stock, Labels, Bond, Letterhead, Preprinted,
colored paper, Custom Type 1, Custom Type 2, Custom Type 3, Custom Type 4
or Custom Type 6
5060-XXX
3-3
Diagnostic Aids