Toshiba e-STUDIO 20CP Service Manual page 50

Error code
141 Motor
142 Motor
143 Motor
144 Motor
145 Motor
146 Motor
147 Motor
148 Motor
149 Motor
150 Motor
151 Motor
152 Motor
153 Motor
154 Motor
155 Motor
5060-XXX
Action
DC Pick Motor Excessive PWM - Staging Motor - Replace the
following FRU:
"Engine Board" on page 4-14
If this does not fix the problem, replace:
Replace the Staging Motor Assembly
DC Pick Motor, over speed - Staging Motor - Replace the Staging
Motor Assembly
DC Pick Motor, No encoder Feedback - Staging Motor - Replace
the Staging Motor Assembly
DC Motor accel stall - Autocompensator Motor - Replace the
following FRU:
Autocompensator Assembly
If this does not fix the problem, replace:
"Engine Board" on page 4-14
DC Motor Excessive PWM Autocompensator Motor - Replace the
following FRU:
Autocompensator Assembly
If this does not fix the problem, replace:
"Engine Board" on page 4-14
DC Motor over speed Autocompensator Motor - Replace the
Autocompensator Assembly
DC Motor Pick Motor, No encoder Feedback - Autocompensator
Motor - Replace the Autocompensator Assembly.
ITU Belt Motor, Unable to lock - Replace the following FRU:
"ITU Drive Motor Assembly" on page 4-39
If this does not fix the problem replace:
"Engine Board" on page 4-14
Fuser Drive Motor unable to lock - Go to
Code 155" on page 2-92.
Black Cartridge Motor unable to lock - Go to
Drive Assembly Service Check" on page
Magenta Cartridge Motor Unable to lock - Go to
Cartridge Drive Assembly" on page
Cyan Cartridge Motor unable to lock - Go to
Drive Assembly Service Check" on page
Yellow Cartridge Motor unable to lock - Go to
Drive Assembly Service Check" on page
ITU Belt Motor - lost lock - Replace the
Assembly" on page 4-39. If this does not correct the problem,
replace the "Engine Board" on page
Fuser Drive Motor - lost lock - Go to
155" on page 2-92.
"Error Code 149 Error
"Black Cartridge
2-47.
"Magenta
2-48.
"Cyan Cartridge
2-49.
"Yellow Cartridge
2-50.
"ITU Drive Motor
4-14.
"Error Code 149 Error Code
Diagnostic Information
2-13