Table of Contents
Advertisement
HCIT System Board LED Error Code Table
If a failure is detected by the system board, an error code may be displayed. If the System
Board LED is On solid, the HCIT detects that the tray or side door is not closed.
The LED on the system board may blink. Count the number of times the LED blinks and
use the following table to determine the problem.
LED
Problem
blinks
1
Jam at registration sensor S2
2
Jam before the leading edge of the paper reaches the registration sensor S2
3
Paper jam is still detected in the HCIT after removing the jam
4
Paper jam is still detected even with front of jam door closed
5
Paper jam detected at pick sensor
6
Error detected with the tray
7
Error detected at the registration roller home position
8
Error detected at the pick roller home position sensor (S1)
9
An error has been detected with the Lift Motor - no motor lock or loss of lock
10
Not used
11
Communication error
12
Other error - Failure of the adjustment of the mirror reflection sensors or EEPROM initialization
5060-XXX
Diagnostic Information
2-21
Advertisement
Table of Contents
