Paper Size Sensing Assembly; Second Transfer Roll - Toshiba e-STUDIO 20CP Service Manual

Paper Size Sensing Assembly

Go to
1.
2.
3.
4.
5.
6.

Second Transfer Roll

Go to
1.
2.
4-42
Service Manual
"Paper Size Sensing Bracket" on page 7-29
Note: The paper size sensing assembly contains components that easily fall apart
as you remove the assembly. Be careful not to lose any of the components.
Remove the "Rear Cover" on page
Remove the "Rear Fan Cover" on page
Remove the "Engine Board Shield" on page
Open the waste toner container door and slide the container out.
Remove the paper size sensing assembly screw type
Remove the assembly.
"Second Transfer Roll" on page 7-8
Remove the "ITU Assembly" on page
Lift the transfer roll from the front bearing and remove the transfer roll.
5060-XXX
for part numbers.
4-11.
4-12.
4-40.
for part number.
4-40.
"323" on page 4-7 (A).