Calibrate Trays
Only Trays that support transparency sensing are displayed.
The following are displayed whenever a tray has been detected that is not calibrated.
This message usually indicates a user-correctable NVRAM problem. The tray may not
have been calibrated or the NVRAM variable for tray calibration may be missing.
To calibrate the tray:
1.
2.
You will be prompted to load paper into the selected tray (not transparencies).
3.
4.
Panel Menus
Select Panel Menus from the Configuration Menu.
PPDS Emulation
This only displays if the PPDS interpreter is available.
Select PPDS Emulation from the Configuration Menu.
Download Emuls
This only displays if at least one Downloaded Emulator is installed.
Select Download Emuls from the Configuration. Menu.
3-4
Service Manual
Tray X
Not Calibrated
Select Calibrate Trays from the Configuration Menu.
Select the desired Tray from the menu.
Load <input source>
Plain Paper
Press GO to initiate calibration.
Press RETURN to abort the calibration and return to the previous menu.
=Disable
=Enable*
=Activate
=Deactivate
=Disable
5060-XXX