Table of Contents
Advertisement
User Primary
Message
Install Tray x or Cancel
Job Install Bin x or
Cancel Job Install
Duplex or Cancel Job
No DRAM Installed
2-34
Service Manual
User Secondary Message
5060-XXX
Explanation
This message will be displayed when the printer
requests the user to insert tray x before it can
continue printing the job. This message is
displayed because the printer needs to pick
media from the missing tray or the trays below it.
*Tray=Tray 1, Tray 2, Tray 3, Tray 4 or Tray 5
Note: This message will most likely be displayed
when refilling the trays during a job. Before filling
tray x take the printer off line by pressing the Stop
button and waiting for pages to reach the output
bin before refilling trays.
The following actions can be taken while this
message is displayed.
* Insert the requested tray
or
* Press Menu> or Menu< to access the
Busy/Waiting Menu Group
The following functions will be available via the
Busy/Waiting Menu:
* Cancel Job
* Reset Printer
* Reset Active Bin
* Check Supply Levels
This message will be displayed when the user
has Hot Unplugged a paper handling option and
the printer requires the reinstallation of the option
to print a page which has been formatted by an
install Tray x interpreter prior to removal of the
option or Cancel Job
* Bin x(x=1,2 or 3)
* Tray x(x=2,3,4 or 5)
* Duplex
The following actions can be taken while this
message is displayed:
* Insert the requested option
or
* Press Menu> or Menu< to access the
Busy/Waiting Menu Group.
The following functions will be available via the
Busy/Waiting Menu:
* Cancel Job
* Reset Printer
* Reset Active Bin
* Check Supply Levels
This message will be displayed when the printer
is turned on and no DRAM is installed.
The following actions can be taken while this
message is displayed:
* Turn the printer off, install DRAM and turn the
printer back on.
Advertisement
Table of Contents
