Table of Contents
Advertisement
–
2.
3.
Tray sensors are supported by the following sources:
Source
L1
Tray 1
Yes
Tray 2
Yes
Tray 3
Yes
Tray 4
Yes
Multi
Yes
Purpose
Feeder
Input Tray Tests (2000-Sheet Tray)
Use this test to determine if the 2000-Sheet Tray sensors are working correctly.
Select Sensor Test from the menu for the tray you want to test.
The following is displayed:
The selected tray is displayed on line 1 <input tray> either Tray 1, 2, 3, or 4.
EM=trays empty sensor
NE=trays near empty sensor
LE=trays paper level sensor
SC=input trays side cover sensor
Manually actuate the bin sensor by moving the flag in and out of the sensor. The display
indicates OP (Open) when the flag is out of the sensor or CL (Closed) when the flag is in
the sensor.
3-14
Service Manual
Sensor P=Input Tray Pass Thru Sensor
Once this message displays, you can manually actuate each sensor. The tray empty
sensor can be actuated by hand, however a sheet of paper can be used to cover the
pass through sensor. When the sensor is closed, CL displays, when the sensor is
open, OP displays.
Press Return/Stop to exit the test.
L2
Yes
Yes
Yes
Yes
No
<input tray> EM=OP
NE=OP LE=OP SC=OP
5060-XXX
Pass thru sensor
No
Yes
Yes
Yes
No
Advertisement
Table of Contents
