A
A-3 Print Options
Print option override hierarchy
The override hierarchy is as follows:
• A user's printer driver settings override the GA-1120 Setup and ColorWise Pro Tools
settings.
• Settings made from Command WorkStation, Fiery WebSpooler, or Fiery Spooler
override the user's printer driver settings.
Default settings
In the following table, underlined settings in the "Option and settings" column
indicate default printer driver settings (PPD defaults). In other words, if you do not
use the printer driver interface to configure a particular option, the GA-1120 prints the
job with the underlined setting.
For options that can be configured in Setup from the Control Panel, Command
WorkStation, WebSetup, or ColorWise Pro Tools, choosing Printer's defaul
the GA-1120 printing the job with the Setup setting specified. For options that cannot
be configured in Setup, the GA-1120 prints the job with a pre-configured "Printer's
default" setting. For more information, see the "Requirements, constraints, and
information" column.
results in
t