Table of Contents
Advertisement
Left Lower Cover
1.
Remove the
"Lower Jam Access Door Assembly" on page
2.
Remove the left lower cover screw type
and remove the cover.
Printheads
Go to
"Printhead Assembly" on page 7-9
Whenever a printhead is removed, it is necessary to perform the
Adjustment" on page 4-1
1.
Remove the
"Top Cover Assembly" on page
2.
Draw a scribe line on the frame next to the front (A) and rear (B) of the printhead to
provide reference points before removing a printhead. When you replace the
printhead, tighten the three mounting screws friction tight so the printhead does not
wobble but can be adjusted left and right.
5060-XXX
"323" on page 4-7
for part numbers.
and
"Printhead Electronic Alignment" on page
4-30.
(A)
"Printhead Manual
4-22.
Repair Information
4-4.
4-33
Advertisement
Table of Contents
