Options And Features - Toshiba e-STUDIO 20CP Service Manual

Options and Features

Toshiba 20CP printers support only Toshiba 20CP paper-handling options. These
options are not compatible with any other Toshiba printer.
•
•
•
•
•
•
High performance
•
•
•
•
1-2
Service Manual
500-Sheet Drawer - (includes 500-sheet tray and support unit) installs beneath the
printer and holds approximately 500 sheets of 20 lb. paper. Multiple optional drawers
are supported simultaneously.
2,000-Sheet Drawer - is designed to be installed beneath the printer and below any
other optional input sources and holds approximately 2,000 sheets of 20 lb. paper
Duplex Unit - offers two-side printing and is designed to complement the Toshiba
20CP printers
Output Expander - installs above the printer's primary output bin to offer an
additional output destination. This holds approximately 650 sheets of 20 lb. paper.
The 20CP supports only one output option above the printer.
5-Bin Mailbox - installs above the printer's primary output bin to offer 5 output
destinations in one part. Each of the five bins supports approximately 100 pages of
20 lb. paper. The 20CP supports only one output option above the printer
Finisher - offers stapling, hole punching, offset stacking and an additional output bin.
Two models will be available. 2-, 3- or 4-hole left-edge hole punching will be
available. The single staple position is the upper left corner. The Finisher can
support up to 3,000 sheets of non-stapled, non-punched media. For stapled media,
the output bin supports up to 90 stapled sets or 2,700 sheets. The stapler can staple
a maximum of 30 sheets per set. Each 20 CP can support one Finisher.
Up to 20 ppm black or color
350 MHz RISC processor
64MB RAM
Time to first page
•
Black: less than 17.5 seconds
•
Color: less than 20 seconds
5060-XXX