Black and White Lock
Enter the Configuration Menu and Select Black and White Lock from the Menu.
Fuser Count Value
Enter the Configuration Menu and Select Fuser Count Value. You can not reset this value.
It only displays if the Maintenance Warning and Intervention function is enabled in the
printer's Configuration ID.
The value can be viewed by pressing SELECT.
Reset Fuser Count
This only displays if the Maintenance Warning and Intervention function is enabled in the
Printer's Configuration ID. The fuser maintenance page counter is incremented when a
page is printed and incremented by two when a duplex sheet is printed. The counter can
be used to track printer usage. When the counter reaches 150,000, the printer posts a
fuser maintenance message on the operator panel.
1.
2.
Print Quality Pages
The Print Quality Test consists of 5 pages of printer information, settings, various color
blacks, color grayscales and color gradients. Use this test to identify print quality
problems. The Test Pages must be printed on A4, Legal or Letter paper.
Enter the Configuration Menu. Pressing SELECT will select the pages to be printed.
Color Trapping
Enter the Configuration Menu and select Color Trapping from the menu. The values are:
3-2
Service Manual
Value List: =On
=Off
Enter the Configuration Menu and Select Reset Fuser Count to view the page count.
Press RETURN to return to the previous menu or Press SELECT to reset the
maintenance page counter back to zero.
=Off =1................5(2*)
5060-XXX