Toshiba e-STUDIO 20CP Service Manual page 53

Error code
182 PSD Error
183 PSD Error
184 PSD Error
185 PSD Error
186 PSD Error
187 PSD Error
188 PSD Error
189 PSD Error
190 PSD Error
2-16
Service Manual
5060-XXX
Action
PSD sensor error (Magenta) - Replace the Magenta
Assembly" on page 4-35.
Note: It is necessary to remove the Printhead Assembly to access
the PSD Sensor Assembly, therefore it is necessary to perform the
"Printhead Adjustments" on page
PSD sensor error (Yellow) - Replace the Yellow
Assembly" on page 4-35.
Note: It is necessary to remove the Printhead Assembly to access
the PSD Sensor Assembly, therefore it is necessary to perform the
"Printhead Adjustments" on page
EOS sensor out of range scan direction (Black) - Replace the Black
"PSD Sensor Assembly" on page
Note: It is necessary to remove the Black Printhead Assembly to
access the PSD Sensor Assembly, therefore it is necessary to
perform the "Printhead Adjustments" on page
EOS sensor out of range scan direction (Cyan) - Replace the Cyan
"PSD Sensor Assembly" on page
Note: It is necessary to remove the Cyan Printhead Assembly to
access the PSD Sensor Assembly, therefore it is necessary to
perform the "Printhead Adjustments" on page
EOS sensor out of range scan direction (Magenta) - Replace the
Magenta "PSD Sensor Assembly" on page
Note: It is necessary to remove the Magenta Printhead Assembly
to access the PSD Sensor Assembly, therefore it is necessary to
perform the "Printhead Adjustments" on page
EOS sensor out of range scan direction (Yellow) - Replace the
Yellow "PSD Sensor Assembly" on page
Note: It is necessary to remove the Yellow Printhead Assembly to
access the PSD Sensor Assembly, therefore it is necessary to
perform the "Printhead Adjustments" on page
EOS sensor out of range process direction (Black) - Replace the
Black "PSD Sensor Assembly" on page
Note: It is necessary to remove the Printhead Assembly to access
the PSD Sensor Assembly, therefore it is necessary to perform the
"Printhead Adjustments" on page
EOS sensor out of range process direction (Cyan) - Replace the
Cyan "PSD Sensor Assembly" on page
Note: It is necessary to remove the Printhead Assembly to access
the PSD Sensor Assembly, therefore it is necessary to perform the
"Printhead Adjustments" on page
EOS sensor out of range process direction (Magenta) - Replace
the Magenta "PSD Sensor Assembly" on page
Note: It is necessary to remove the Printhead Assembly to access
the PSD Sensor Assembly, therefore it is necessary to perform the
"Printhead Adjustments" on page
"PSD Sensor
4-1.
"PSD Sensor
4-1.
4-35.
4-1.
4-35.
4-1.
4-35.
4-1.
4-35.
4-1.
4-35.
4-1.
4-35.
4-1.
4-35.
4-1.