Table of Contents
Advertisement
User Primary
Message
56 Std Parallel Port
Disabled
56 Parallel Port x
Disabled
56 Standard USB Port
Disabled
56 USB Port x
Disabled
58 Too Many Trays
Attached
58 Too Many Bins
Attached
2-42
Service Manual
User Secondary Message
5060-XXX
Explanation
These messages may be displayed when data is
sent to the printer across a parallel port, but the
port has been disabled.
Note: Once the error has been displayed for the
first time, reporting of further errors will be
suppressed until the printer is reset or menus are
entered.
The following actions can be taken while this
message is displayed:
* Press Go to clear the message. Any data
received on the parallel port will be discarded.
* Press Menu> or Menu< to access the Busy/
Waiting Menu Group.
The following functions may be available:
* Reset Printer
* Reset Active Bin
* Check Supply Levels
Note: Menu Lockout does NOT prevent access to
the Busy/Waiting Menu Group.
These messages may be displayed when data is
sent to the printer across the USB port, but the
port has been disabled.
Note: Once the error has been displayed for the
first time, reporting of further errors will be
suppressed until the printer is reset or menus are
entered.
The following actions can be taken while this
message is displayed:
* Press Go to clear the message. Any data
received on the USB port will be discarded
* Press Menu> or Menu< to access the Busy/
Waiting Menu Group.
The following functions may be available:
* Reset Printer
* Reset Active Bin
* Check Supply Levels
Note: Menu Lockout does NOT prevent access to
the Busy/Waiting Menu Group.
This message will be displayed when too many
trays have been attached to the printer. Check
the specifications check the number of trays
allowed on each printer model.
This message will be displayed when too may
optional bins have been attached to the printer or
if an unsupported combination of bins has been
installed.
Advertisement
Table of Contents
