Table of Contents
Advertisement
2xx
Primary
code
Message
250
Paper Jam
Clear Paper Path
Go to the
"Multipurpose
Feeder (MPF)
Service Check" on
page 2-102
251
Paper Jam
Clear Paper Path
Go to the
"Autocompensator
Service Check" on
page 2-99
271
Paper Jam
Clear Paper Path
2-24
Service Manual
5060-XXX
Secondary
Message
Leave Job in Finisher
Leave Job in Finisher
Leave Job in Finisher
Description
Primary: Media is jammed in the MP Feeder. If
sheets have been accumulated to be stapled or
offset when the jam occurred, the printer
alternately flashes the primary and secondary
messages to indicate that all accumulated sheets
not be removed during the jam clearing
procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
Primary: Media is jammed in the paper path near
the MP Feeder due to an in-line transparency
sensor mismatch. If sheets have been
accumulated to be stapled or offset when the jam
is detected, the printer alternately flashes the
primary and secondary messages to indicate that
all accumulated sheets should not be removed
during the jam clearance procedure.
Secondary: Do not remove accumulated sheets
during the jam clearance procedure. The printer
will not reprint the removed sheets. Also, if the
accumulated sheets are removed, the portion of
the job printed after the jam will not be stapled.
Primary: Media is jammed at output Bin 1. Open
the rear door of Bin 1 to access the jam. If sheets
have been accumulated to be stapled or offset
when the jam occurred, the printer alternately
flashes the primary and secondary messages to
indicate that all accumulated sheets not be
removed during the jam clearing procedure.
Secondary: When this message is displayed, do
not remove accumulated sheets during the jam
clearance procedure as the printer will not reprint
the removed sheets. Also, if the accumulated
sheets are removed, the portion of the job printed
after the jam will not be stapled.
Advertisement
Table of Contents
