Specifying Both The Original Size And The Copy Paper Size Separately - Toshiba E-studio 207L Operation Manual

3 BASIC COPY MODES
 Specifying both the original size and the copy paper size separately
Place paper in the drawer(s).
1
2 Place the original(s).
3 Press [ZOOM] on the touch panel.
4 Select the desired sizes for the original and copy paper, and then press [OK].
 If you want to select a size other than the following for the original size and copy paper size, you
need to register the size as "OTHER". Once you register this size, it will be specified every time
you press [OTHER] on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register, see the following page:
 P.63 "Registering paper sizes to "OTHER" size"
 Paper sizes can also be registered by pressing the desired drawer button of the equipment
status indication area on the BASIC menu.
5 Select other copy modes as required, and then press the [START] button on the control
panel.
62 Enlargement and Reduction Copying