Toshiba B-FP2D-GH30-QM-S Owner's Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Printer
  5. B-FP2D-GH30-QM-S
  6. Owner's manual

Toshiba B-FP2D-GH30-QM-S Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Portable Printer
Owner's Manual
B-FP2D-GH30-QM-S
B-FP2D-GH50-QM-S

Advertisement

Table of Contents
loading

Related Manuals for Toshiba B-FP2D-GH30-QM-S

Summary of Contents for Toshiba B-FP2D-GH30-QM-S

  • Page 1 Portable Printer Owner's Manual B-FP2D-GH30-QM-S B-FP2D-GH50-QM-S...

  • Page 2: Table Of Contents

    CONTENTS 1. Precautions............................3 2. Part Names ............................. 10 3. Accessories ............................. 11 4. Operation Panel Functions ....................... 12 5. Loading the Battery Pack ......................... 14 6. Removing the Battery Pack ......................16 7. Charging the Battery Pack with an Optional Adapter ................17 8.
  • Page 3 2 CONTENTS...

  • Page 4: Precautions

    CE marking is the responsibility of Toshiba Tec Germany Imaging Systems GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany, phone +49-(0)-2131-1245-0. For a copy of the related CE Declaration of Conformity, please contact your dealer, Toshiba Tec Germany Imaging Systems GmbH or Toshiba Tec Corporation.
  • Page 5 CAUTION! Only use Toshiba Tec battery packs designed and manufactured for use with the specific printer model. The battery used in this device may present a risk of fire or chemical burn if mistreated. Do no disassemble, heat above +50degC, or incinerate. Replace battery with the B-FP2D series only. There is a risk of fire or explosion if the battery is replaced by an incorrect type.
  • Page 6 Precautions for Handling of Wireless Communication Devices Bluetooth® Module: MBH7BTZ42 Wireless LAN Module: RS9113DB Trademark Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. and used by Toshiba Tec Corporation under license. Cautions General For all countries and areas This product is a wireless communication device, and the use of this product is restricted to the following countries or areas.
  • Page 7 Do not attempt to effect repairs to this equipment. If a fault occurs that cannot be rectified using the procedures described in this manual, turn off the power, then contact your authorised Toshiba Tec representative for assistance. Safety Precautions This Owner's Manual and the products (machines) which you have purchased contain indications which should be observed in order to use the machines safely and prevent harm to yourself and others and damage to property.
  • Page 8 Be sure to use a shielded interface cable. CAUTION! This manual may not be copied in whole or in part without the prior written permission of Toshiba Tec. The contents of this manual may be changed without notification. Please refer to your local Authorised Service representative with regard to any queries you may have in this manual.
  • Page 9 Use the specified battery only. Failure to do this may cause fire or electric shock. Danger of explosion if the battery is incorrectly replaced. Replace the battery only with a Toshiba Tec Corporation, Battery Pack Model B-FP803-BTH-QM-R. Discard used batteries according to the manufacturer's instruction.
  • Page 10 Doing so may damage the battery or affect the performance and life of the battery. Importer (For EU, EFTA): Toshiba Tec Germany Imaging Systems GmbH Carl-Schurz-Str. 7, 41460 Neuss, Germany Importer (For UK): Toshiba Tec U.K.

  • Page 11: Part Names

    2. Part Names [ 2 ] [ 8 ] [ 1 ] [ 6 ] [ 6 ] [ 5 ] [ 7 ] [ 3 ] [ 12 ] [ 11 ] [ 14 ] [ 10 ] [ 4 ] [ 13 ] [ 10 ] [ 9 ]...

  • Page 12: Accessories

    3. Accessories [ 1 ] [ 2 ] [ 3 ] [ 4 ] [ 5 ] [ 6 ] BD Address abcdefabcdef [ 7 ] [ 8 ] Part Name Part Name Owner's Manual Print head cleaner Safety Precaution Sheet BD address label CDROM Belt clip...

  • Page 13: Operation Panel Functions

    4. Operation Panel Functions [ 11 ] [ 12 ] [ 13 ] [ 2 ] [ 9 ] [ 3 ] [ 5 ] , [ 6 ] , [ 7 ] , [ 8 ] [ 4 ] ONLINE [ 10 ] [ 1 ]...
  • Page 14 Name/Icon Function/Usage Sleep This is displayed while the printer is in the power save mode. Error This is displayed when an error occurs in the printer. Battery level Indicate the battery level in 10 levels and percentage level Parts Alert Platen Roller Near Indicates the time to change the platen roller soon.

  • Page 15: Loading The Battery Pack

    5. Loading the Battery Pack WARNING! If the battery pack leaks liquid or gives out smoke or a bad smell, immediately stop using it and keep it away from fire. Failure to do this may cause an explosion or a fire. In the United States, used lithium ion batteries should be returned to the store where you bought the machine.
  • Page 16 Be sure to use only the battery pack designed and manufactured for use with the printer B-FP2D series Battery Pack: B-FP803-BTH-QM-R When unpacked, the battery level of the supplied battery pack is not full. Charge the battery pack with an optional battery charger or load the battery pack in the printer and connect an optional adapter before using it.

  • Page 17: Removing The Battery Pack

    6. Removing the Battery Pack Press the battery lever [1] to open the battery cover [2]. [ 1 ] [ 2 ] Pull the tab [4] to remove the battery pack [3] from the printer. [ 4 ] [ 3 ] 16 6.

  • Page 18: Charging The Battery Pack With An Optional Adapter

    7. Charging the Battery Pack with an Optional Adapter Charge the battery pack in the printer using an optional AC adapter, cigarette lighter adapter, or DC adapter. Open the cover [1]. [ 1 ] Connect the power adapter cable [2] into the DCIN connector [3]. [ 3 ] [ 2 ] For details, refer to the Owner’s Manual for the respective optional adapters.

  • Page 19: Loading The Media Roll

    8. Loading the Media Roll Push the top cover open button [1] to open the top cover [2]. [ 2 ] [ 1 ] CAUTION! The print head becomes hot immediately after printing. Let the print head cool down before loading the media roll.
  • Page 20 [2]. [ 2 ] [ 5 ] Use the Toshiba Tec approved media only. Toshiba Tec is not responsible for any print result caused by use of other media. When you order media, contact the nearest Toshiba Tec representative.

  • Page 21: Before Using The Peel-Off Unit

    9. Before using the Peel-off Unit When issuing labels in the peel-off mode, pull out the peel-off roller before loading a media roll. Push the top cover open button [1] to open the top cover [2]. [ 2 ] [ 1 ] Push the lock lever [3] in the direction of the arrow.
  • Page 22 Pull the top edge of the media roll [5] toward the operation panel side. Remove the slack of the media roll and close the top cover [2]. [ 2 ] [ 5 ] Close the peel-off unit [4]. [ 4 ] Do not pull the center of the peel-off roller hard.

  • Page 23: How To Put Away The Peel-Off Roller

    How to put away the peel-off roller Push the top cover open button [1] to open the top cover [2]. [ 2 ] [ 1 ] Gently press the peel-off roller [3] down and push it into the printer in the direction indicated by the arrow until it clicks.

  • Page 24: How To Attach The Accessories

    10. How to Attach the Accessories CAUTION! Care should be taken not to drop the printer when securing it to your waist or slinging it over your shoulder. For fixing the printer to your belt, its width should be 40 mm or less. Use of the other belts may cause the printer to fall off.

  • Page 25: Shoulder Strap (Option)

    Shoulder strap (Option) Follow the procedure below to fasten an optional shoulder strap (B-EP900-SS-QM-R) to the printer. Pass either end of the shoulder strap [1] through the strap slot [2] on the front of the printer. Pass the end of the shoulder strap [1] through the buckle [3]. Slide the buckle [3] to adjust the length of the shoulder strap [1].

  • Page 26: Data Transmission

    Connect the USB cable to the host PC. Send data from the host PC to the printer. For details of the USB cable, consult the nearest Toshiba Tec representative. When disconnecting the USB cable, follow the instructions of the system of the host PC.

  • Page 27: Wireless

    Especially, metal obstacles, metal powder or locations enclosed by [ 2 ] metal walls may prevent proper communication. For the installation location of access points, consult the nearest 1. Host PC Toshiba Tec representative. 2. Handy terminal 3. Access point 26 11. Data Transmission...

  • Page 28: Daily Maintenance

    12. Daily Maintenance To help retain the high performance quality of your printer, clean it regularly. CAUTION! Do not use a sharp object to clean the print head or various rollers. This may cause a print failure or a breakdown of the printer.

  • Page 29: Media Sensor Window And The Media Path

    Media sensor window and the media path Remove dust or dirt from the media sensor window [1] with a commercially available soft, dry brush. [ 1 ] Wipe the media path [2] with a soft, dry cloth. After one or two linerless label media rolls are used, wipe off any [ 1 ] residual glue dirt from the media guides.

  • Page 30: Troubleshooting

    When the problem still persists even if the following solutions have been performed, do not attempt to repair it by yourself. Turn off the printer and remove the battery pack. Then contact a Toshiba Tec service representative for assistance.
  • Page 31 The battery voltage is abnormal. Turn off the printer. Remove the battery pack, reload it, and turn on the printer again If the problem recurs, turn off the power and contact a Toshiba Tec service representative. CHARGE ERROR An error was detected while charging It could be the end of the battery life.
  • Page 32 The media roll used has deteriorated Load a new media roll. past its use date. The media is not a Toshiba Tec Use Toshiba Tec approved media. approved one The printer received print The STATUS lamp is lit or blinking.

  • Page 33: Printer Specification

    14. Printer Specification Model B-FP2D-GH30-QM-S B-FP2D-GH50-QM-S Media type Label, Tag, Receipt, Linerless Label Print method Direct thermal Resolution 203dpi (8dots/mm) Print speed Max 6 inches/s (152.4 mm/s) (It depends on the operating environment, print conditions, battery condition and etc.) Effective print width...

  • Page 34: Media Specification

    15. Media Specification <Labels> Print surface Roll direction: facing outside Feed direction <Tags/Receipts> Black Mark (Reverse Side） Print surface Roll direction: facing outside Feed direction 15. Media Specification 33...
  • Page 35 (Unit: mm) Media Label Receipt type Linerless With black Without Mode Batch Strip Item marks black marks A Label pitch Min. 10.0 13.0 10.0 10.0 16.0 Max. 999.9 67.0 999.9 B Label length Min. 10.0 Max. 996.9 60.0 996.9 C Backing paper width Min.

  • Page 36: Care/Handling Of The Media Roll

    16. Care/Handling of the Media Roll CAUTION! Be sure to read carefully and understand the Supply Manual. Use only media that meet the specified requirements. The use of non-specified media may shorten the head life and result in problems with bar code readability or print quality.
  • Page 37 36 16. Care/Handling of the Media Roll...
  • Page 38 Portable Printer Owner's Manual B-FP2D-GH30-QM-S B-FP2D-GH50-QM-S 1-11-1, OSAKI, SHINAGAWA-KU, TOKYO, 141-8562, JAPAN PRINTED IN INDONESIA © 2019-2022 Toshiba Tec Corporation All rights reserved Ver04 F BU21000400-EN...

This manual is also suitable for:

B-fp2d-gh50-qm-s

Table of Contents